The 3832 has been around for many years and can be found across the world in many applications. Accuride’s continual re-invention of the slide has made it a best seller, and probably the most copied.
This versatile slide is what most cabinet makers would consider a ‘standard’. It has a 12.7mm thickness (½ inch), is compatible with both 32mm and traditional hole patterns, and can take loads up to 45kg, making it a good all-rounder for cabinet drawers where a side mounted slide is needed.
The first development was the addition of breathing tabs on the cabinet member. These seem pretty ordinary now, but this was an important first step in the evolution of the 3832.
The space between the cabinet and drawer is critical when fitting slides. This need for precision can make life difficult for woodworkers. So some of the fixing holes are located on a ‘breathing tab’; a small tongue of metal with a U slot around it. Because of the slot, the tip of the tongue can bend a bit out of the plane of the rest of the metal. That is, the cabinet member can pull away from the cabinet wall, just a little, to help absorb those tricky tolerances.
All 3832 slides include an integral quick release lever so that the user can separate the slide into the cabinet and drawer member.
This feature has two distinct advantages. The first is for the fitter. Being able to separate the parts of the slide and fit them individually onto the cabinet chassis and drawer makes the job a simple one.
Secondly, once installed, the disconnect lever is used to take the drawer out of the cabinet and put it back again without the need for tools; perhaps a benefit for the user rather than the cabinet maker.
The Cam Drawer Adjust offers installers a simple, yet precise mechanism for vertical drawer adjustment. The cam mechanism alters the vertical position of drawers by up to 4.8mm and is located at the front of the slide for easy access. It’s as simple as inserting a screwdriver and turning the mechanism to the left or right to provide the proper adjustment.
This may seem rather simple, but it is important that the slides are held in position – you don’t want the drawers bouncing open once closed and all 3832 slides have hold-in.
The hold-out is equally important for applications such as pull out keyboard shelves, when you would need it to stay open during use.
A dampened, soft-closing drawer just feels good and this one is side mounted, rather than the usual under-mount slide used in kitchen drawers.
Our self-closing slides ensure drawers come to a close and stay closed, keeping things looking neat and tidy. There are two options; a standard self-close and a heavier duty version, which is ideal for mobile applications such as trolley drawers.
If you like the look of simple, clean drawer fronts or need to design for those who have difficulty grasping knobs or handles, then our touch-release products are the answer. A gentle press on the drawer front releases the drawer and propels it outward about 45mm.
More fitting options are available through the use of clip on brackets, allowing both bottom and platform mounting. These can be fitted to the standard 3832 plus DO and SC/HDSC versions from length 35cm.
|3832 & 3832DH||3832||3832|
|Brackets 633xx||Brackets 633xx||Brackets 633xx|
Das Cargobike wurde so konzipiert, dass ein Rollstuhlfahrer das Gefühl des Radfahrens genießen kann. Der Hersteller erkannte, dass eine...